Can a technical parameter sheet for the API standard sieve be provided?

The API standard screens produced by TR Solids Control meet the strict requirements of the oil drilling industry's solid control systems regarding screening accuracy and equipment compatibility. Their technical parameters are fully compliant with the API 13C certification standards, featuring high processing capacity, strong vibratory performance, and long service life.

mud shaker screens | TR Solids control supply

I. Core Technical Parameters

1. Screen Mesh Range

• Standard Mesh: API 20 to API 400 (corresponding to commonly used 18–200 mesh, with maximum support for 325–400 mesh)
• Fine Screening Option: API 200 mesh and above, suitable for barite recovery in weighted mud
• Mesh Selection Basis: Low mesh numbers (e.g., 40–80 mesh) are commonly used for shallow wells/water-based mud; high mesh numbers (e.g., 150–200 mesh) are selected for deep wells/oil-based mud to improve recovery rate

2. Screen Material

• Main Configuration: 304 stainless steel wire mesh, offering good strength and corrosion resistance
• High Corrosion Resistance Selection: 316L stainless steel material, suitable for high-salinity and high-acid/alkali drilling fluid environments, with a maximum service life of 720 hours

3. Screen Structural Form

• Frame Structure: Constructed with square steel tubes or flat steel welding, incorporating reinforcing ribs to ensure high-strength operation
• Screen Cloth Combination: Supports 2–3 layer composite screens (e.g., coarse screen + fine screen overlay) to enhance grading efficiency
• Bonding Process: Metal plate compression bonding or high-strength adhesive bonding to ensure flat screen surface and no delamination

4. Screen Type and Compatible Machines

• Type Coverage: Wave-shaped, flat, and edge-locked screens
• Compatibility with Mainstream Brands: Can replace original equipment screens of Derrick, SWACO, Brandt and other brands
• Installation Method: Wedge clamping device and mechanical ratchet wrench quick-clamping system, enabling replacement within 5 minutes

5. Screen Size (Standard Specifications)

• 1830mm × 760mm / 1250mm × 630mm / 1050mm × 695mm / 1150mm × 1000mm
• Non-standard customization is supported, with precise matching according to customer equipment interface dimensions

Vibrating Screen Accompanying Performance

• When equipped with a high-frequency linear shale shaker, the excitation intensity can reach 8.5G, enhancing screening efficiency.
• Multi-layer screen configuration enables graded processing: the upper coarse screen (40–80 mesh) removes large particles, while the lower fine screen (200 mesh) recovers barite.

7. Certification and Standards

• Passes API 13C certification by the American Petroleum Institute.
• Complies with the ISO 9001 quality management system standard.
• The production process strictly follows international specifications for drilling fluid solid control equipment.